Autopilot FED3 Panel

From Autopilot Wiki
Revision as of 18:41, 24 September 2022 by Matiasandina (talk | contribs) (Created page with "{{Schematic |Image=Autopilot fed panel.jpeg |Modality=Enclosures |Schematic Type=2D CAD |Short Description=Modified Panel that adds FED3 and Water bottle to Autopilot Behavior...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Autopilot FED3 Panel
Autopilot fed panel.jpeg
Modality Enclosures
Schematic Type 2D CAD
Description Modified Panel that adds FED3 and Water bottle to Autopilot Behavior Box
Creator Matias Andina
Version 1.0
Date
Repository
Git Hash
Used In: Autopilot Behavior Box
Remixes: Autopilot Hex Panel
.DXF File:Property "Has DXF" (as page type) with input value "File:" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.
.PDF File:Autopilot hex panel FED3 water.dxf
Manufacturer Link {{{Manufacturer Link}}}
Other Files

This panel was designed to hold

Fabrication Notes

The fit is quite tight. The user is advised to slightly modify the position of the gaps (i.e., either move the FED3 gap upper or increase the height of the gap). If using Autopilot Tray, the FED3 is likely held in place between the tray and the acrylic gap. In other applications, magnets can hold the FED3 in place, helped by an extra 1 inch 80/20 piece to bring support at the back of the FED3.