Autopilot FED3 Panel
From Autopilot Wiki
Revision as of 15:52, 26 September 2022 by Matiasandina (talk | contribs)
| Autopilot FED3 Panel | |
|---|---|
| |
| Modality | Enclosures |
| Schematic Type | 2D CAD |
| Description | Modified Panel that adds FED3 and Water bottle to Autopilot Behavior Box |
| Creator | Matias Andina |
| Version | 1.0 |
| Date | |
| Repository | |
| Git Hash | |
| Used In: | Autopilot Behavior Box |
| Remixes: | Autopilot Hex Panel |
| .DXF | File:Autopilot hex panel FED3 water.dxf |
|---|---|
| File:Property "Has PDF" (as page type) with input value "File:" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. | |
| Manufacturer Link | {{{Manufacturer Link}}} |
| Other Files |
|
This panel was designed to have a space for a FED3 device (https://github.com/KravitzLabDevices/FED3), and a water bottle Autopilot Water Bottle Holder.
Fabrication Notes
The fit is quite tight. The user is advised to slightly modify the position of the gaps (i.e., either move the FED3 gap upper or increase the height of the gap). If using Autopilot Tray, the FED3 is likely held in place between the tray and the acrylic gap. In other applications, magnets can hold the FED3 in place, helped by an extra 1 inch 80/20 piece to bring support at the back of the FED3.
... more about "Autopilot FED3 Panel"
Modified Panel that adds FED3 and Water bottle to Autopilot Behavior Box +
