Difference between revisions of "Autopilot Hex Panel"
Line 5: | Line 5: | ||
|Short Description=Behavior Box Panel with hexagonal holes for sound transmission | |Short Description=Behavior Box Panel with hexagonal holes for sound transmission | ||
|Creator=Jonny Saunders | |Creator=Jonny Saunders | ||
− | |Version= | + | |Version=3 |
|Submitted Date=2021-06-28 | |Submitted Date=2021-06-28 | ||
|Git Repo=https://github.com/auto-pi-lot/autopilot-hardware | |Git Repo=https://github.com/auto-pi-lot/autopilot-hardware | ||
Line 23: | Line 23: | ||
|Material Kind=Plastic | |Material Kind=Plastic | ||
|Material Dimensions=3/32" (thickness) | |Material Dimensions=3/32" (thickness) | ||
+ | }} | ||
+ | |||
+ | == Variants == | ||
+ | |||
+ | === Slotted === | ||
+ | |||
+ | This slotted version is intended to go with the slotted version of the [[Used With::Behavior Panel Bottom]], rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful | ||
+ | |||
+ | {{Schematic | ||
+ | |Image=Autopilot hex panel_slotted.png | ||
+ | |Modality=Enclosures | ||
+ | |Schematic Type=2D CAD | ||
+ | |Short Description=Behavior Box Panel with hexagonal holes for sound transmission | ||
+ | |Creator=Jonny Saunders | ||
+ | |Version=2 | ||
+ | |Submitted Date=2021-06-28 | ||
+ | |Git Repo=https://github.com/auto-pi-lot/autopilot-hardware | ||
+ | |Git Hash=e29e5e0 | ||
+ | }} | ||
+ | {{2D CAD | ||
+ | |.DXF=Autopilot hex panel slotted.dxf | ||
+ | |.PDF=Autopilot hex panel slotted.pdf | ||
}} | }} |
Latest revision as of 23:45, 22 August 2022
Autopilot Hex Panel | |
---|---|
Modality | Enclosures |
Schematic Type | 2D CAD |
Description | Behavior Box Panel with hexagonal holes for sound transmission |
Creator | Jonny Saunders |
Version | 3 |
Date | 2021-06-28 |
Repository | https://github.com/auto-pi-lot/autopilot-hardware |
Git Hash | e29e5e0 |
Used In: | Autopilot Behavior Box |
Remixes: |
.DXF | File:Autopilot hex panel.dxf |
---|---|
File:Autopilot hex panel.pdf | |
Manufacturer Link | {{{Manufacturer Link}}} |
Other Files |
A panel for Autopilot Behavior Box, used on the sides and top. The panel has slots on the bottom that fit into Behavior Panel Bottom and uses a pair of magnets with Autopilot Hex Panel Pegs to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.
Fabrication Notes
This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.
Variants
Slotted
This slotted version is intended to go with the slotted version of the Behavior Panel Bottom, rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful
Autopilot Hex Panel | |
---|---|
Modality | Enclosures |
Schematic Type | 2D CAD |
Description | Behavior Box Panel with hexagonal holes for sound transmission |
Creator | Jonny Saunders |
Version | 2 |
Date | 2021-06-28 |
Repository | https://github.com/auto-pi-lot/autopilot-hardware |
Git Hash | e29e5e0 |
Used In: | Autopilot Behavior Box |
Remixes: |
.DXF | File:Autopilot hex panel slotted.dxf |
---|---|
File:Autopilot hex panel slotted.pdf | |
Manufacturer Link | {{{Manufacturer Link}}} |
Other Files |