Difference between revisions of "Autopilot Hex Panel Tripoke"

From Autopilot Wiki
Jump to: navigation, search
 
Line 5: Line 5:
 
|Short Description=Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box
 
|Short Description=Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box
 
|Creator=Jonny Saunders
 
|Creator=Jonny Saunders
|Version=3
+
|Version=4
 
|Submitted Date=2021-06-28
 
|Submitted Date=2021-06-28
 +
|Git Repo=https://github.com/auto-pi-lot/autopilot-hardware
 +
|Git Hash=e29e5e0
 
}}
 
}}
 
{{2D CAD
 
{{2D CAD

Latest revision as of 00:25, 23 August 2022


Autopilot Hex Panel Tripoke
Autopilot hex panel tripoke.png
Modality Enclosures, Reinforcement
Schematic Type 2D CAD
Description Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box
Creator Jonny Saunders
Version 4
Date 2021-06-28
Repository https://github.com/auto-pi-lot/autopilot-hardware
Git Hash e29e5e0
Used In: Autopilot Behavior Box, Autopilot Tripoke
Remixes:
.DXF File:Autopilot hex panel tripoke.dxf
.PDF File:Autopilot hex panel tripoke.pdf
Manufacturer Link {{{Manufacturer Link}}}
Other Files


A panel for Autopilot Behavior Box, used to mount an Autopilot Tripoke. The panel has hexagonal holes for use with Autopilot Hex Panel Pegs when assembled in the full box. A Autopilot Panel Handle is typically used to carry and manipulate the panel.

Fabrication Notes

This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.


Variants

Slotted

This slotted version is intended to go with the slotted version of the Behavior Panel Bottom, rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful


Autopilot Hex Panel Tripoke
Autopilot hex panel tripoke slotted.png
Modality Enclosures, Reinforcement
Schematic Type 2D CAD
Description Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box
Creator Jonny Saunders
Version 2
Date 2021-06-28
Repository
Git Hash
Used In: Autopilot Behavior Box, Autopilot Tripoke
Remixes:
.DXF File:Autopilot hex panel tripoke slotted.dxf
.PDF File:Autopilot hex panel tripoke slotted.pdf
Manufacturer Link {{{Manufacturer Link}}}
Other Files