Autopilot LED Mount

From Autopilot Wiki
Revision as of 02:03, 4 August 2021 by Jonny (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Autopilot LED Mount
Autopilot led mount.png
Modality Illumination
Schematic Type 3D CAD
Description Mount a SMC LED to the top of an Autopilot Behavior Box
Creator Jonny Saunders
Version 1
Date 2021-06-28
Repository https://github.com/auto-pi-lot/autopilot-hardware
Git Hash f4018b8
Used In: Wehrlab
Remixes:

https://wiki.auto-pi-lot.com/images/d/d5/Autopilot_led_mount_clip.stl https://wiki.auto-pi-lot.com/images/f/f1/Autopilot_led_mount_f.stl https://wiki.auto-pi-lot.com/images/7/71/Autopilot_led_mount_m.stl

.STL
.STEP
Other Files

Mount a small SMC LED soldered onto a prototyping board (See GPIO-Switched LED) onto a Autopilot Hexagonal Panel.

Assembly

This part is intended to house a SMC LED mounted in the center of a 17.5mmx17.5mm section of prototyping board (6 x 6 holes with typical spacing) -- or, on the bottom of the red rectangle in the below image.

Autopilot led mount board.png

After making the LED board, you can affix it to the inside of either top piece (with eg. a small glob of hot glue) and clip the pieces together.

Push the clip piece through the panel to be attached to, and screw the top piece through the threads in the clip.

Autopilot led mount attach clip.png

Fabrication Notes