Autopilot Nosepoke Needle Holder

From Autopilot Wiki
Revision as of 01:52, 4 August 2021 by Jonny (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Autopilot Nosepoke Needle Holder
Modality Reinforcement
Schematic Type 3D CAD
Description Hold an 18g Needle!
Creator Jonny Saunders
Version 1
Date 2021-06-28
Repository https://github.com/auto-pi-lot/autopilot-hardware
Git Hash f4018b8
Used In: Autopilot Tripoke
Remixes:

https://wiki.auto-pi-lot.com/images/5/5b/Autopilot_nosepoke_needle_holder.stl

.STL
.STEP
Other Files

Hold an 18g needle on the back of the Autopilot Tripoke

Fabrication Notes

You will need to cut the needle to size with a dremel or a similar tool. We have had success pushing the needle through the nosepoke and marking the point where it passes through the Autopilot Nosepoke Cap and adding ~2mm.