Difference between revisions of "Autopilot Panel Handle"

From Autopilot Wiki
Jump to: navigation, search
Line 8: Line 8:
 
}}
 
}}
 
{{3D CAD
 
{{3D CAD
|.STL=File:Autopilot_panel_handle.stl
+
|.STL=Autopilot_panel_handle.stl
|.STEP=File:Autopilot_panel_handle.step
+
|.STEP=Autopilot_panel_handle.step
  
 
}}
 
}}

Revision as of 02:48, 29 June 2021


Autopilot Panel Handle
Modality Enclosures
Schematic Type 3D CAD
Description A handle to attach to Autopilot Hex Panels
Creator Jonny Saunders
Version 2
Date 2021/06/28
Repository
Git Hash
Used In: Autopilot Behavior Box
Remixes:

https://wiki.auto-pi-lot.com/images/b/bc/Autopilot_panel_handle.stl

.STL
.STEP
Other Files

Fabrication Notes

SLA - I print vertically (long axis up and down w.r.t build plate), many can fit close together if alternated directions.

Additive - No supports should be needed for overhang in center typically. The main point of failure when printed horizontally (back face on build plate) is that the top "handle" part can be ripped off with excessive force, but this doesn't happen with typical usage.

Autopilot Hex Panel handle, for use with Autopilot Behavior Box. A handle for holding and manipulating the panels. Can be attached anywhere, the hexagonal cutouts typically aligned with the openings on the panel, and usually placed near the top edge.