Autopilot Panel Handle

From Autopilot Wiki
Revision as of 21:12, 28 June 2021 by Jonny (talk | contribs) (Created page with "{{Schematic |Modality=Enclosures |Schematic Type=3D CAD |Short Description=A handle to attach to Autopilot Hex Panels |Creator=Jonny Saunders |Version=2 |Submitted Date=20...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Autopilot Panel Handle
Modality Enclosures
Schematic Type 3D CAD
Description [[Has Description::A handle to attach to Autopilot Hex Panels]]
Creator Jonny Saunders
Version 2
Date 2021/06/28
Repository
Git Hash
Used In: Autopilot Behavior Box
Remixes:


.STL
.STEP
Other Files

Fabrication Notes

SLA - I print vertically (long axis up and down w.r.t build plate), many can fit close together if alternated directions.

Additive - No supports should be needed for overhang in center typically. The main point of failure when printed horizontally (back face on build plate) is that the top "handle" part can be ripped off with excessive force, but this doesn't happen with typical usage.

Autopilot Hex Panel handle, for use with Autopilot Behavior Box. A handle for holding and manipulating the panels. Can be attached anywhere, the hexagonal cutouts typically aligned with the openings on the panel, and usually placed near the top edge.