View source for Speaker Mount - HiVi

{{Schematic
|Image=Speaker mount hivi.jpg
|Modality=Audio
|Schematic Type=3D CAD
|Short Description=Mount an ultrasonic HiVi RT1.3WE tweeter at an angle
|Creator=Jonny Saunders
|Version=1
|Submitted Date=2021-06-28
}}
{{3D CAD
|.STL=Speaker holder.stl, Speaker mount.stl
|.STEP=Hivi speaker fork.step, Hivi speaker base.step
}}
Mount a [[Uses Part::HiVi RT1.3WE]] at an angle, usually used with [[Autopilot Tripoke]] in order to deliver sound over the poke panel. 

Assembly is straightforward and there's really only one way to do it -- attach the speaker to the fork, then jam the fork in the base. The fork can be redesigned to fit other speakers while using the same base, though there is nothing particularly special about the base.
==Fabrication Notes==
Since this is mounting a speaker, it needs to be reasonably massive and rigid, so it should be printed with high infill or solidly. We have found little speaker distortion when the speaker is mounted with its nylon screws against its foam backing on the fork piece.