Difference between revisions of "Raspberry Pi 80/20 Mount"
From Autopilot Wiki
Line 1: | Line 1: | ||
{{ Printed_Part | {{ Printed_Part | ||
+ | | created_by = Jonny Saunders | ||
| modality = Structural | | modality = Structural | ||
| part_type = Raspberry Pi | | part_type = Raspberry Pi |
Latest revision as of 22:14, 18 May 2021
Raspberry Pi 80/20 Mount | |
Created By | Jonny Saunders |
---|---|
Modality | Structural |
Part Type | Raspberry Pi |
STL | File:RPi4_8020_mount_flat.stl |
Version | 1 |
Date Updated | 2021-03-02 |
Assembled In | |
Thingiverse Link | https://www.thingiverse.com/thing:3744587 |
Thingiverse Link | https://www.thingiverse.com/thing:3744587 |
Remixes | {{{remixes}}}Property "Remixed As" (as page type) with input value "{{{remixes}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. |
Mount a Raspberry Pi and a breadboard onto 80/20. From user NotLikeALeafOnTheWind at thingiverse.
Three versions:
- File:RPi4 8020 mount flat.stl - Pi/Breadboard mount with flat bottom (from: https://www.thingiverse.com/thing:3744587])
- File:RPi4 8020 mount bumper.stl - Pi/Breadboard mount with bumper bottom shaped for 1-inch (10-series) 80/20 Extruded Aluminum bars (from: [1])
- File:RPi4 8020 mount flat dual.stl - Dual Pi mount with flat bottom (remixed: [2])