Schematics

From Autopilot Wiki
Jump to: navigation, search


Schematic Types

 Has Description
2D CADFlat schematics like those for laser engravings and layouts
3D CADMesh schematics like 3d-printable parts and assembled component files
PCBsPrinted circuit boards (and all other circuit schematics, even nonprinted ones)

Schematics

 Is Schematic TypeModalityHas Description
1L Bottle Wall Mount3D CADReinforcementMount a 1L Nalgene bottle upside down on a wall
Autolevel Bottle Cap3D CADReinforcementCap for 1L Nalgene bottle that dispenses water with constant force despite bottle level
Autopilot Debris Guard3D CADEnclosuresAn 8"x8" square guard that can be glued onto an 8"x8" acrylic panel.
Autopilot Hex Panel2D CADEnclosuresBehavior Box Panel with hexagonal holes for sound transmission
Autopilot Hex Panel Pegs3D CADEnclosuresPegs to mount hex panels
Autopilot Hex Panel Tripoke2D CADEnclosures
Reinforcement
Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box
Autopilot LED Mount3D CADIlluminationMount a SMC LED to the top of an Autopilot Behavior Box
Autopilot Nosepoke Cap3D CADReinforcement
Sensors
Nosepoke cap to hold an IR Breakbeam sensor and an RGB LED for mouse-sized subject interaction.
Autopilot Nosepoke Needle Holder3D CADReinforcementHold an 18g Needle!
Autopilot Panel Handle3D CADEnclosuresHandles to attach to Autopilot Hex Panels
Autopilot Soundproof Box Jigs3D CADEnclosuresJigs to help position panels when building the Autopilot Soundproof Box
Autopilot Tripoke Panel3D CADReinforcementMount three Autopilot Nosepokes on a Tripoke Panel for mouse-sized input and reward delivery
Behavior Panel Bottom2D CADEnclosuresBottom panel for the Autopilot Behavior Box
Neuralynx EIB social cap3D CADImplants
Electrophysiology
An attachable cap for the Neuralynx 32-channel EIB, to allow for chronic social-housing.
Single-poke PCBPCBReinforcementThis is a printed circuit board for a single nosepoke, with beam-break sensor, solenoid valve, tricolor LED, and passive circuit elements to control all of the above.
Speaker Mount - HiVi3D CADAudioMount an ultrasonic HiVi RT1.3WE tweeter at an angle
Triple 5V Solenoid Board (Schematic)PCBReinforcementA board to drive three 5V solenoid valves from a Raspberry Pi
Tripoke PCBPCBReinforcementdouble-PCB that powers three nosepokes worth of RGB LEDs and IR beam break sensors
Wireless Optogenetic Illuminator Circuit2D CADIlluminationCircuit board for Wireless Optogenetic Illuminator Circuit