Difference between revisions of "Rigol DS1054Z"

From Autopilot Wiki
Jump to: navigation, search
Line 43: Line 43:
 
#* Press "Installed"
 
#* Press "Installed"
  
=== References ===
+
=== See Also ===
  
 
* [https://gotroot.ca/rigol/riglol/ Gotroot - riglol (original)]
 
* [https://gotroot.ca/rigol/riglol/ Gotroot - riglol (original)]
 
* [https://github.com/jakeson21/riglol Slightly updated fork]
 
* [https://github.com/jakeson21/riglol Slightly updated fork]
 
* [http://www.n5dux.com/ham/riglol/ Helpful riglol guide]
 
* [http://www.n5dux.com/ham/riglol/ Helpful riglol guide]
 +
 +
 +
== References ==
 +
 +
* [[Has Manual::File:MSO1000Z UserGuide.pdf|MSO1000Z User Guide]]
 +
* [[Has Manual::File:DS1000Z-E_ProgrammingGuide_EN.pdf|DS1000Z Programming Guide]]

Revision as of 00:57, 28 April 2022

Rigol DS1054Z
Image DS1054Z1.jpg
Modality Measurement, Electronics
Tool Type Instrument, Oscilloscope
Manufacturer Rigol Technologies
Product ID/Part Number DS1054Z
Product Page https://www.rigolna.com/products/digital-oscilloscopes/1000z/
Datasheet File:MSO1000Z UserGuide.pdf
Price (USD) 419
Controlled By: Autopilot Paper
Rigol DS1054Z
Analog Channels 4
Digital Channels 0
Sampling Rate (Hz) 1000000000
Bandwidth (Hz) 50000000
External Interfaces USB, Ethernet, RS232
Memory Size (MB) 24

Oscilloscope


Note: Sampling rate is split across channels, so 1GHz when one channel is used, 500MHz when two, and 250MHz if three or four.

Unlocking Features

By default, the DS1054Z comes with a number of features builtin that are locked to the "premium" versions. Thanksfully there is a tool "riglol" that lets us overcome them.

  1. Get serial number
    • Press "Utility" in the menu button cluster
    • Press "System" in the buttons to the right of the screen
    • Then "System Info"
    • Write down the value for "SN"
  2. Get Key
    • Go to the riglol page or n5dux's mirror
    • Enter your serial number, and enter "DSFR" for Options (all options enabled)
    • Click generate.
  3. Enter the Key
    • Press "Utility"
    • Scroll down to "Options"
    • Press "Setup"
    • Press "Editor"
    • Use the intensity knob to enter the key generated above.
    • Press enter!
  4. Confirm Changes
    • "Utility" > "Options"
    • Press "Installed"

See Also


References