File list
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | User | Description | Versions |
---|---|---|---|---|---|---|
02:07, 4 August 2021 | Panel-brace-top.stl (file) | ![]() |
392 KB | Jonny | 1 | |
02:07, 4 August 2021 | Panel-brace-peg.stl (file) | ![]() |
99 KB | Jonny | 1 | |
01:58, 4 August 2021 | Side handle real.jpg (file) | ![]() |
255 KB | Jonny | 2 | |
01:56, 4 August 2021 | Panel handle side.stl (file) | ![]() |
140 KB | Jonny | 1 | |
01:56, 4 August 2021 | Panel handle side.step (file) | ![]() |
193 KB | Jonny | 1 | |
01:29, 4 August 2021 | Autolevel bottle cap.step (file) | ![]() |
950 KB | Jonny | 1 | |
01:28, 4 August 2021 | Autolevel cap spout.stl (file) | ![]() |
1,018 KB | Jonny | 1 | |
01:27, 4 August 2021 | Autolevel cap siphon.stl (file) | ![]() |
1.03 MB | Jonny | 1 | |
01:26, 4 August 2021 | Autolevel cap.png (file) | ![]() |
682 KB | Jonny | 1 | |
00:11, 10 July 2021 | RHD2132 amp accel board angle 431.jpg (file) | ![]() |
43 KB | Nsattler | 1 | |
00:05, 10 July 2021 | EIB-36-PTB-v2.png (file) | ![]() |
611 KB | Nsattler | 1 | |
23:44, 9 July 2021 | Neuralynx EIB social cap.png (file) | ![]() |
80 KB | Nsattler | 1 | |
23:41, 9 July 2021 | SocialCap.stl (file) | ![]() |
6 KB | Nsattler | An attachable cap for the Neuralynx 32-channel EIB, to allow social-housing of mice | 1 |
02:33, 8 July 2021 | Triple 5v valve board built.jpg (file) | ![]() |
308 KB | Jonny | 1 | |
02:23, 8 July 2021 | Triple 5v solenoid board.pdf (file) | ![]() |
18 KB | Jonny | 1 | |
02:23, 8 July 2021 | Triple 5v solenoid board.sch (file) | ![]() |
6 KB | Jonny | 1 | |
02:19, 8 July 2021 | 5V solenoid board.png (file) | ![]() |
220 KB | Jonny | 1 | |
02:00, 8 July 2021 | Assman AWH 24G-0222-T.pdf (file) | ![]() |
182 KB | Jonny | 1 | |
01:58, 8 July 2021 | AWH24G-0222-T-R.png (file) | ![]() |
231 KB | Jonny | 1 | |
01:42, 8 July 2021 | TT OPB900-913.pdf (file) | ![]() |
685 KB | Jonny | 1 | |
01:41, 8 July 2021 | TT OPB901L55.png (file) | ![]() |
174 KB | Jonny | 1 | |
00:49, 8 July 2021 | Tripoke assembly order.png (file) | ![]() |
231 KB | Jonny | 1 | |
00:04, 8 July 2021 | Raspi 4 pinout.png (file) | ![]() |
313 KB | Jonny | File uploaded with MsUpload | 1 |
23:31, 7 July 2021 | Tripoke pcb double annotated.png (file) | Error creating thumbnail: File with dimensions greater than 12.5 MP |
330 KB | Jonny | 1 | |
23:26, 7 July 2021 | Tripoke pcb double.rrb (file) | ![]() |
8 KB | Jonny | 1 | |
23:15, 7 July 2021 | Tripoke pcb double.png (file) | ![]() |
85 KB | Jonny | 1 | |
01:15, 7 July 2021 | HiVi-RT13WE-frequency-response.png (file) | ![]() |
256 KB | Jonny | The text on the axes is very blurry -- the y axis ticks go from -10 to 110 dbSPL, the x-axis ticks start at 400Hz on a logarithmic scale, the first major division is 1kHz, and ends at 40kHz. Of the spectra lines, the top line is on-axis, and is roughly flat from 2kHz to 30kHz, then dips by 5dBSPL at 40kHz. The lower line is 30 degree off-axis. | 1 |
01:12, 7 July 2021 | HiVi-RT13WE-spec-sheet.pdf (file) | ![]() |
94 KB | Jonny | 1 | |
01:00, 7 July 2021 | HiVi RT1-3WE.jpg (file) | ![]() |
144 KB | Jonny | 1 | |
00:27, 7 July 2021 | Lee lhda.png (file) | ![]() |
28 KB | Jonny | 1 | |
00:26, 7 July 2021 | LHDA0030000BA-Datasheet.pdf (file) | ![]() |
95 KB | Jonny | 1 | |
00:46, 3 July 2021 | Luer lock male sm.jpg (file) | ![]() |
36 KB | Jonny | File uploaded with MsUpload | 1 |
00:46, 3 July 2021 | Luer lock female sm.jpg (file) | ![]() |
25 KB | Jonny | File uploaded with MsUpload | 1 |
03:14, 2 July 2021 | HiFiBerryAmp2.jpg (file) | ![]() |
61 KB | Jonny | 1 | |
00:21, 29 June 2021 | Speaker mount hivi.jpg (file) | ![]() |
265 KB | Jonny | File uploaded with MsUpload | 1 |
00:21, 29 June 2021 | Speaker mount.stl (file) | ![]() |
117 KB | Jonny | File uploaded with MsUpload | 1 |
00:21, 29 June 2021 | Speaker holder.stl (file) | ![]() |
198 KB | Jonny | File uploaded with MsUpload | 1 |
00:21, 29 June 2021 | Hivi speaker fork.step (file) | ![]() |
73 KB | Jonny | File uploaded with MsUpload | 1 |
00:21, 29 June 2021 | Hivi speaker base.step (file) | ![]() |
47 KB | Jonny | File uploaded with MsUpload | 1 |
23:52, 28 June 2021 | Autopilot tripoke panel.stl (file) | ![]() |
183 KB | Jonny | File uploaded with MsUpload | 1 |
23:52, 28 June 2021 | Autopilot nosepoke cap.stl (file) | ![]() |
1.47 MB | Jonny | File uploaded with MsUpload | 1 |
23:52, 28 June 2021 | Autopilot nosepoke needle holder.stl (file) | ![]() |
418 KB | Jonny | File uploaded with MsUpload | 1 |
23:52, 28 June 2021 | Autopilot nosepoke needle holder.step (file) | ![]() |
44 KB | Jonny | File uploaded with MsUpload | 1 |
23:52, 28 June 2021 | Autopilot nosepoke cap.step (file) | ![]() |
574 KB | Jonny | File uploaded with MsUpload | 1 |
23:52, 28 June 2021 | Autopilot tripoke panel.step (file) | ![]() |
66 KB | Jonny | File uploaded with MsUpload | 1 |
23:40, 28 June 2021 | Autopilot led mount board.png (file) | ![]() |
1.63 MB | Jonny | File uploaded with MsUpload | 1 |
23:40, 28 June 2021 | Autopilot led mount attach clip.png (file) | ![]() |
1.57 MB | Jonny | File uploaded with MsUpload | 1 |
23:25, 28 June 2021 | Autopilot led mount.png (file) | ![]() |
542 KB | Jonny | File uploaded with MsUpload | 1 |
23:25, 28 June 2021 | Autopilot led mount m.stl (file) | ![]() |
333 KB | Jonny | File uploaded with MsUpload | 1 |
23:25, 28 June 2021 | Autopilot led mount f.stl (file) | ![]() |
276 KB | Jonny | File uploaded with MsUpload | 1 |