Difference between revisions of "Autopilot Debris Guard"
From Autopilot Wiki
(Created page with "{{Schematic |Modality=Enclosures |Schematic Type=3D CAD |Short Description=An 8'x8' guard that can is glued onto an 8'x8' acrylic panel. |Creator=Lucas Ott |Version=1.0 |Submi...") |
|||
Line 2: | Line 2: | ||
|Modality=Enclosures | |Modality=Enclosures | ||
|Schematic Type=3D CAD | |Schematic Type=3D CAD | ||
− | |Short Description=An 8'x8' guard that can is glued onto an 8'x8' acrylic panel. | + | |Short Description=An 8'x8' square guard that can is glued onto an 8'x8' acrylic panel. |
|Creator=Lucas Ott | |Creator=Lucas Ott | ||
|Version=1.0 | |Version=1.0 |
Revision as of 21:36, 15 March 2022
Autopilot Debris Guard | |
---|---|
Modality | Enclosures |
Schematic Type | 3D CAD |
Description | An 8'x8' square guard that can is glued onto an 8'x8' acrylic panel. |
Creator | Lucas Ott |
Version | 1.0 |
Date | 2022-03-15 |
Repository | |
Git Hash | |
Used In: | |
Remixes: |
.STL | |
---|---|
.STEP | |
Other Files |
Fabrication Notes
... more about "Autopilot Debris Guard"