View source for Autopilot Tray

{{Schematic
|Image=Tray.jpg
|Modality=Enclosures
|Schematic Type=2D CAD
|Short Description=Tray to collect bedding material and fluids.
|Creator=Matias Andina
|Version=1.0
}}
{{2D CAD
|.DXF=Tray.dxf
}}
The file is to be cut in the same acrylic width as the Autopilot Panels.

Cut the acrylic using the laser cutter, and position the cuts together in a box shape. It is easier to use small pieces of tape as shown in the picture. Then remove one face of the box at a time and weld it using any acrylic weld. You should do the welding in a well ventilated area (e.g., a fume hood) and let the tray sit for at least 24 hours before giving it to mice.
==Fabrication Notes==
Modifications of this box can be readily done using https://en.makercase.com/#/basicbox