Difference between revisions of "TT Electronics OPB903L55"
From Autopilot Wiki
Line 10: | Line 10: | ||
|Passive Component Type=Sensor | |Passive Component Type=Sensor | ||
|Voltage=5 | |Voltage=5 | ||
+ | }} | ||
+ | {{Sensor | ||
+ | |Sensor Type=IR Beam Break | ||
}} | }} | ||
This is an alternative to the [[skos:Related::TT Electronics OPB901L55]]. The form factor and pinout are identical. However, the output is inverted: high normally and low during the poke. Flip the POLARITY setting in prefs.json to make this work. | This is an alternative to the [[skos:Related::TT Electronics OPB901L55]]. The form factor and pinout are identical. However, the output is inverted: high normally and low during the poke. Flip the POLARITY setting in prefs.json to make this work. |
Latest revision as of 01:57, 2 July 2022
TT Electronics OPB903L55 | |
---|---|
Modality | Sensors |
Part Type | Passive Components |
Manufacturer | TT Electronics |
Product ID/Part Number | OPB903L55 |
Product Page | http://www.digikey.com/en/products/detail/tt-electronics-optek-technology/OPB903L55/1637496
|
Price (USD) | 5.05 |
TT Electronics OPB903L55 | |
---|---|
Passive Component Type | Sensor |
Operating Voltage | 5
|
TT Electronics OPB903L55 | |
---|---|
Sensor Type | IR Beam Break |
This is an alternative to the TT Electronics OPB901L55. The form factor and pinout are identical. However, the output is inverted: high normally and low during the poke. Flip the POLARITY setting in prefs.json to make this work.
... more about "TT Electronics OPB903L55"