Difference between revisions of "Autopilot Water Bottle Holder"
From Autopilot Wiki
Matiasandina (talk | contribs) (Created page with "{{Schematic |Modality=Enclosures |Schematic Type=3D CAD |Short Description=Water Bottle Holder for Autopilot Hex Panel |Creator=Matias Andina |Version=1 }} {{3D CAD}} ==Fabri...") |
Matiasandina (talk | contribs) |
||
| Line 6: | Line 6: | ||
|Version=1 | |Version=1 | ||
}} | }} | ||
| − | {{3D CAD}} | + | {{3D CAD |
| − | + | |.STL=Autopilot Bottle Holder.stl | |
| + | }} | ||
| + | The holes in the design are made for an M3 or M2.5 screw/nut pair. | ||
==Fabrication Notes== | ==Fabrication Notes== | ||
Revision as of 12:43, 25 September 2022
| Autopilot Water Bottle Holder | |
|---|---|
| Modality | Enclosures |
| Schematic Type | 3D CAD |
| Description | Water Bottle Holder for Autopilot Hex Panel |
| Creator | Matias Andina |
| Version | 1 |
| Date | |
| Repository | |
| Git Hash | |
| Used In: | Autopilot Behavior Box, Autopilot FED3 Panel |
| Remixes: | |
| .STL | |
|---|---|
| .STEP | |
| Other Files |
The holes in the design are made for an M3 or M2.5 screw/nut pair.
Fabrication Notes
... more about "Autopilot Water Bottle Holder"
Water Bottle Holder for Autopilot Hex Panel +