Difference between revisions of "Autopilot Water Bottle Holder"
From Autopilot Wiki
Matiasandina (talk | contribs) (Created page with "{{Schematic |Modality=Enclosures |Schematic Type=3D CAD |Short Description=Water Bottle Holder for Autopilot Hex Panel |Creator=Matias Andina |Version=1 }} {{3D CAD}} ==Fabri...") |
Matiasandina (talk | contribs) |
||
Line 6: | Line 6: | ||
|Version=1 | |Version=1 | ||
}} | }} | ||
− | {{3D CAD}} | + | {{3D CAD |
− | + | |.STL=Autopilot Bottle Holder.stl | |
+ | }} | ||
+ | The holes in the design are made for an M3 or M2.5 screw/nut pair. | ||
==Fabrication Notes== | ==Fabrication Notes== |
Revision as of 12:43, 25 September 2022
Autopilot Water Bottle Holder | |
---|---|
Modality | Enclosures |
Schematic Type | 3D CAD |
Description | Water Bottle Holder for Autopilot Hex Panel |
Creator | Matias Andina |
Version | 1 |
Date | |
Repository | |
Git Hash | |
Used In: | Autopilot Behavior Box, Autopilot FED3 Panel |
Remixes: |
.STL | |
---|---|
.STEP | |
Other Files |
The holes in the design are made for an M3 or M2.5 screw/nut pair.
Fabrication Notes
... more about "Autopilot Water Bottle Holder"
Water Bottle Holder for Autopilot Hex Panel +