Autopilot Nosepoke Needle Holder
From Autopilot Wiki
| Autopilot Nosepoke Needle Holder | |
|---|---|
| Modality | Reinforcement |
| Schematic Type | 3D CAD |
| Description | Hold an 18g Needle! |
| Creator | Jonny Saunders |
| Version | 1 |
| Date | 2021-06-28 |
| Repository | https://github.com/auto-pi-lot/autopilot-hardware |
| Git Hash | f4018b8 |
| Used In: | Autopilot Tripoke |
| Remixes: | |
| .STL | |
|---|---|
| .STEP | |
| Other Files |
Hold an 18g needle on the back of the Autopilot Tripoke
Fabrication Notes
You will need to cut the needle to size with a dremel or a similar tool. We have had success pushing the needle through the nosepoke and marking the point where it passes through the Autopilot Nosepoke Cap and adding ~2mm.
... more about "Autopilot Nosepoke Needle Holder"