Behavior Panel Bottom
| Behavior Panel Bottom | |
|---|---|
| |
| Modality | Enclosures |
| Schematic Type | 2D CAD |
| Description | Bottom panel for the Autopilot Behavior Box |
| Creator | Jonny Saunders |
| Version | 2 |
| Date | 2021-06-28 |
| Repository | https://github.com/auto-pi-lot/autopilot-hardware |
| Git Hash | e29e5e0 |
| Used In: | Autopilot Behavior Box |
| Remixes: | |
| .DXF | File:Behavior panel bottom.dxf |
|---|---|
| File:Behavior panel bottom.pdf | |
| Manufacturer Link | {{{Manufacturer Link}}} |
| Other Files |
The bottom panel for Autopilot Behavior Box. The panel has peg holes to fit Autopilot Hex Panel Pegs, and can be attached to an frame made of 80/20 - 1010, 1" t-slot profile extruded aluminum or sit on top of it unattached for easier cleaning. It has an etched slot around the behavior area to help keep liquid inside
Fabrication Notes
This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but you may have to adjust the size of the slots depending on the material thickness you use.
Variants
Slotted
This slotted version is intended to go with the slotted version of the Behavior Panel Bottom, rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful
| Behavior Panel Bottom | |
|---|---|
| |
| Modality | Enclosures |
| Schematic Type | 2D CAD |
| Description | Bottom panel for the Autopilot Behavior Box |
| Creator | Jonny Saunders |
| Version | 2 |
| Date | 2021-06-28 |
| Repository | |
| Git Hash | |
| Used In: | Autopilot Behavior Box |
| Remixes: | |
| .DXF | File:Behavior panel bottom slotted.dxf |
|---|---|
| File:Behavior panel bottom slotted.pdf | |
| Manufacturer Link | {{{Manufacturer Link}}} |
| Other Files |
