Difference between revisions of "Autopilot Hex Panel Pegs"

From Autopilot Wiki
Jump to: navigation, search
(Created page with "{{Schematic |Image=panel_pegs.png |Modality=Enclosures |Schematic Type=3D CAD |Short Description=Pegs to mount hex panels |Creator=Jonny Saunders |Version=1 |Submitted Date=20...")
 
Line 14: Line 14:
 
|.STEP=panel-pegs.step
 
|.STEP=panel-pegs.step
 
}}
 
}}
 +
== Pegs ==
 +
 
Pegs to mount [[Used With::Autopilot Hex Panel]]s to themselves and 80/20 pieces!!!  
 
Pegs to mount [[Used With::Autopilot Hex Panel]]s to themselves and 80/20 pieces!!!  
  
Line 28: Line 30:
  
 
[[File:Lucas_Rail_Pegs.jpg|class=img-responsive]]
 
[[File:Lucas_Rail_Pegs.jpg|class=img-responsive]]
 +
 +
== Braces ==
 +
 +
The panel-brace pieces slide into a [[80/20 - 1010]] bar as well and are used to hold the top panel up -- magnets proved to be too weak and the pegs too easily broken.
 
==Fabrication Notes==
 
==Fabrication Notes==
 
Drainage holes have been added for SLA printing, as well as to release pressure when magnets are being inserted. We recommend that the "top," or the side with the hexagonal peg, is printed on the bottom.
 
Drainage holes have been added for SLA printing, as well as to release pressure when magnets are being inserted. We recommend that the "top," or the side with the hexagonal peg, is printed on the bottom.
 +
 +
The tolerance for the peg for the top brace may need to be adjusted on your printer, as it's a friction-fit piece!

Revision as of 02:28, 4 August 2021


Autopilot Hex Panel Pegs
Panel pegs.png
Modality Enclosures
Schematic Type 3D CAD
Description Pegs to mount hex panels
Creator Jonny Saunders
Version 1
Date 2021-08-03
Repository https://github.com/auto-pi-lot/autopilot-hardware
Git Hash f4018b8
Used In: Autopilot Behavior Box
Remixes:

https://wiki.auto-pi-lot.com/images/6/67/Panel-brace-peg.stl https://wiki.auto-pi-lot.com/images/1/13/Panel-brace-top.stl https://wiki.auto-pi-lot.com/images/4/4e/Peg-body-magnet-solid.stl https://wiki.auto-pi-lot.com/images/c/c9/Peg-body-peg-solid.stl https://wiki.auto-pi-lot.com/images/6/65/Peg-rail.stl

.STL
.STEP
Other Files

Pegs

Pegs to mount Autopilot Hex Panels to themselves and 80/20 pieces!!!

Each of the pegs fits into the smaller hexagonal hole in the hex panel near the corner. We typically attach these with Super Glue but there is a threaded version in the .step file.

They come in two flavors:

  • Peg-body-peg-solid.stl - this piece is held in place with its peg through a hole, typically those of the Behavior Panel Bottom.
  • Peg-body-magnet-solid.stl - this piece holds D36 Magnets to be held in place against a rail piece

The peg-rail.stl piece also fits a D36 Magnet, and slides into a 80/20 - 1010 series T-slotted aluminum bar.

And look they all stack together!!!!

File:Lucas Rail Pegs.jpg

Braces

The panel-brace pieces slide into a 80/20 - 1010 bar as well and are used to hold the top panel up -- magnets proved to be too weak and the pegs too easily broken.

Fabrication Notes

Drainage holes have been added for SLA printing, as well as to release pressure when magnets are being inserted. We recommend that the "top," or the side with the hexagonal peg, is printed on the bottom.

The tolerance for the peg for the top brace may need to be adjusted on your printer, as it's a friction-fit piece!