Autopilot Hex Panel

From Autopilot Wiki
Jump to: navigation, search


Autopilot Hex Panel
Autopilot hex panel.png
Modality Enclosures
Schematic Type 2D CAD
Description Behavior Box Panel with hexagonal holes for sound transmission
Creator Jonny Saunders
Version 3
Date 2021-06-28
Repository https://github.com/auto-pi-lot/autopilot-hardware
Git Hash e29e5e0
Used In: Autopilot Behavior Box
Remixes:
.DXF File:Autopilot hex panel.dxf
.PDF File:Autopilot hex panel.pdf
Manufacturer Link {{{Manufacturer Link}}}
Other Files

A panel for Autopilot Behavior Box, used on the sides and top. The panel has slots on the bottom that fit into Behavior Panel Bottom and uses a pair of magnets with Autopilot Hex Panel Pegs to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.

Fabrication Notes

This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.


Variants

Slotted

This slotted version is intended to go with the slotted version of the Behavior Panel Bottom, rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful


Autopilot Hex Panel
Autopilot hex panel slotted.png
Modality Enclosures
Schematic Type 2D CAD
Description Behavior Box Panel with hexagonal holes for sound transmission
Creator Jonny Saunders
Version 2
Date 2021-06-28
Repository https://github.com/auto-pi-lot/autopilot-hardware
Git Hash e29e5e0
Used In: Autopilot Behavior Box
Remixes:
.DXF File:Autopilot hex panel slotted.dxf
.PDF File:Autopilot hex panel slotted.pdf
Manufacturer Link {{{Manufacturer Link}}}
Other Files