Autopilot Hex Panel Pegs
From Autopilot Wiki
Autopilot Hex Panel Pegs | |
---|---|
Modality | Enclosures |
Schematic Type | 3D CAD |
Description | Pegs to mount hex panels |
Creator | Jonny Saunders |
Version | 1 |
Date | 2021-08-03 |
Repository | https://github.com/auto-pi-lot/autopilot-hardware |
Git Hash | f4018b8 |
Used In: | Autopilot Behavior Box |
Remixes: |
.STL | |
---|---|
.STEP | |
Other Files |
Pegs to mount Autopilot Hex Panels to themselves and 80/20 pieces!!!
Each of the pegs fits into the smaller hexagonal hole in the hex panel near the corner. We typically attach these with Super Glue but there is a threaded version in the .step file.
They come in two flavors:
- Peg-body-peg-solid.stl - this piece is held in place with its peg through a hole, typically those of the Behavior Panel Bottom.
- Peg-body-magnet-solid.stl - this piece holds D36 Magnets to be held in place against a rail piece
The peg-rail.stl piece also fits a D36 Magnet, and slides into a 80/20 - 1010 series T-slotted aluminum bar.
And look they all stack together!!!!
Fabrication Notes
Drainage holes have been added for SLA printing, as well as to release pressure when magnets are being inserted. We recommend that the "top," or the side with the hexagonal peg, is printed on the bottom.
... more about "Autopilot Hex Panel Pegs"