Difference between revisions of "Autopilot LED Mount"
From Autopilot Wiki
Line 9: | Line 9: | ||
}} | }} | ||
{{3D CAD | {{3D CAD | ||
− | |.STL=Autopilot led mount m.stl | + | |.STL=Autopilot led mount m.stl, Autopilot led mount f.stl, Autopilot led mount clip.stl |
|.STEP=Autopilot led mount.step | |.STEP=Autopilot led mount.step | ||
− | |||
}} | }} | ||
− | |||
− | |||
Mount a small SMC LED soldered onto a prototyping board (See [[Uses Schematic::GPIO-Switched LED]]) onto a [[Uses Schematic::Autopilot Hexagonal Panel]]. | Mount a small SMC LED soldered onto a prototyping board (See [[Uses Schematic::GPIO-Switched LED]]) onto a [[Uses Schematic::Autopilot Hexagonal Panel]]. | ||
Line 28: | Line 25: | ||
[[File:autopilot_led_mount_attach_clip.png|class=img-responsive]] | [[File:autopilot_led_mount_attach_clip.png|class=img-responsive]] | ||
− | |||
− | |||
==Fabrication Notes== | ==Fabrication Notes== |
Revision as of 02:03, 4 August 2021
Autopilot LED Mount | |
---|---|
Modality | Illumination |
Schematic Type | 3D CAD |
Description | Mount a SMC LED to the top of an Autopilot Behavior Box |
Creator | Jonny Saunders |
Version | 1 |
Date | 2021-06-28 |
Repository | |
Git Hash | |
Used In: | Wehrlab |
Remixes: |
.STL | |
---|---|
.STEP | |
Other Files |
Mount a small SMC LED soldered onto a prototyping board (See GPIO-Switched LED) onto a Autopilot Hexagonal Panel.
Assembly
This part is intended to house a SMC LED mounted in the center of a 17.5mmx17.5mm section of prototyping board (6 x 6 holes with typical spacing) -- or, on the bottom of the red rectangle in the below image.
After making the LED board, you can affix it to the inside of either top piece (with eg. a small glob of hot glue) and clip the pieces together.
Push the clip piece through the panel to be attached to, and screw the top piece through the threads in the clip.
Fabrication Notes
... more about "Autopilot LED Mount"