Difference between revisions of "Autopilot Nosepoke Cap"

From Autopilot Wiki
Jump to: navigation, search
Line 1: Line 1:
 
{{Schematic
 
{{Schematic
|Modality=Reinforcement,Sensors
+
|Modality=Reinforcement, Sensors
 
|Schematic Type=3D CAD
 
|Schematic Type=3D CAD
 
|Short Description=Nosepoke cap to hold an IR Breakbeam sensor and an RGB LED for mouse-sized subject interaction.
 
|Short Description=Nosepoke cap to hold an IR Breakbeam sensor and an RGB LED for mouse-sized subject interaction.
Line 11: Line 11:
 
|.STEP=Autopilot nosepoke cap.step
 
|.STEP=Autopilot nosepoke cap.step
 
}}
 
}}
Top piece of the [[Assembled In::Autopilot Tripoke]], the part that the experimental subject will interact with that holds the [[Uses Part Category::RGB LED]] and [[Uses Part Category::IR Break Beam Sensor]].
+
Top piece of the [[Assembled In::Autopilot Tripoke]], the part that the experimental subject will interact with that holds the [[Uses Part Category::RGB LED]] and [[Uses Part::TT Electronics OPB901L55]].
 
==Fabrication Notes==
 
==Fabrication Notes==

Revision as of 01:48, 4 August 2021


Autopilot Nosepoke Cap
Modality Reinforcement, Sensors
Schematic Type 3D CAD
Description Nosepoke cap to hold an IR Breakbeam sensor and an RGB LED for mouse-sized subject interaction.
Creator Jonny Saunders
Version 1
Date 2021-06-28
Repository
Git Hash
Used In: Autopilot Tripoke
Remixes:

https://wiki.auto-pi-lot.com/images/6/63/Autopilot_nosepoke_cap.stl

.STL
.STEP
Other Files

Top piece of the Autopilot Tripoke, the part that the experimental subject will interact with that holds the RGB LED and TT Electronics OPB901L55.

Fabrication Notes