Difference between revisions of "Autopilot Nosepoke Needle Holder"

From Autopilot Wiki
Jump to: navigation, search
(Created page with "{{Schematic |Modality=Reinforcement |Schematic Type=3D CAD |Short Description=Hold an 18g Needle! |Creator=Jonny Saunders |Version=1 |Submitted Date=2021-06-28 }} {{3D CAD |.S...")
 
Line 13: Line 13:
 
Hold an 18g needle on the back of the [[Assembled In::Autopilot Tripoke]]
 
Hold an 18g needle on the back of the [[Assembled In::Autopilot Tripoke]]
 
==Fabrication Notes==
 
==Fabrication Notes==
 +
You will need to cut the needle to size with a dremel or a similar tool. We have had success pushing the needle through the nosepoke and marking the point where it passes through the [[Used With::Autopilot Nosepoke Cap]] and adding ~2mm.

Revision as of 01:49, 4 August 2021


Autopilot Nosepoke Needle Holder
Modality Reinforcement
Schematic Type 3D CAD
Description Hold an 18g Needle!
Creator Jonny Saunders
Version 1
Date 2021-06-28
Repository
Git Hash
Used In: Autopilot Tripoke
Remixes:

https://wiki.auto-pi-lot.com/images/5/5b/Autopilot_nosepoke_needle_holder.stl

.STL
.STEP
Other Files

Hold an 18g needle on the back of the Autopilot Tripoke

Fabrication Notes

You will need to cut the needle to size with a dremel or a similar tool. We have had success pushing the needle through the nosepoke and marking the point where it passes through the Autopilot Nosepoke Cap and adding ~2mm.