Difference between revisions of "Autopilot Hex Panel"
From Autopilot Wiki
| Line 12: | Line 12: | ||
|.PDF=Autopilot hex panel.pdf | |.PDF=Autopilot hex panel.pdf | ||
}} | }} | ||
| − | A panel for [[Assembled In::Autopilot Behavior Box]], used on the sides and top. The panel has slots on the bottom that fit into [[Used With::Behavior Bottom | + | A panel for [[Assembled In::Autopilot Behavior Box]], used on the sides and top. The panel has slots on the bottom that fit into [[Used With::Behavior Panel Bottom]] and uses a pair of magnets with [[Used With::Autopilot Hex Panel Bracket]] to snap the top into place. A [[Used With::Autopilot Panel Handle]] is typically used to carry and manipulate the panel. |
==Fabrication Notes== | ==Fabrication Notes== | ||
This is intended to be laser cut out of 3/32"-thick [[Uses Material::Cast Acrylic]]. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use. | This is intended to be laser cut out of 3/32"-thick [[Uses Material::Cast Acrylic]]. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use. | ||
Revision as of 02:19, 25 May 2022
| Autopilot Hex Panel | |
|---|---|
| Modality | Enclosures |
| Schematic Type | 2D CAD |
| Description | Behavior Box Panel with hexagonal holes for sound transmission |
| Creator | Jonny Saunders |
| Version | 2 |
| Date | 2021-06-28 |
| Repository | |
| Git Hash | |
| Used In: | Autopilot Behavior Box |
| Remixes: | |
| .DXF | File:Autopilot hex panel.dxf |
|---|---|
| File:Autopilot hex panel.pdf | |
| Manufacturer Link | {{{Manufacturer Link}}} |
| Other Files |
A panel for Autopilot Behavior Box, used on the sides and top. The panel has slots on the bottom that fit into Behavior Panel Bottom and uses a pair of magnets with Autopilot Hex Panel Bracket to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.
Fabrication Notes
This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.
... more about "Autopilot Hex Panel"
June 28, 2021 +
Behavior Box Panel with hexagonal holes for sound transmission +
e29e5e0 +
Has subobject"Has subobject" is a predefined property representing a container construct and is provided by Semantic MediaWiki.