Difference between revisions of "Autopilot Hex Panel"

From Autopilot Wiki
Jump to: navigation, search
(Created page with "{{Schematic |Image=Autopilot hex panel.dxf |Modality=Enclosures |Schematic Type=2D CAD |Short Description=Behavior Box Panel with hexagonal holes for sound transmission |Creat...")
 
Line 1: Line 1:
 
{{Schematic
 
{{Schematic
|Image=Autopilot hex panel.dxf
+
|Image=Autopilot hex panel.png
 
|Modality=Enclosures
 
|Modality=Enclosures
 
|Schematic Type=2D CAD
 
|Schematic Type=2D CAD

Revision as of 01:36, 29 June 2021


Autopilot Hex Panel
Autopilot hex panel.png
Modality Enclosures
Schematic Type 2D CAD
Description Behavior Box Panel with hexagonal holes for sound transmission
Creator Jonny Saunders
Version 2
Date 2021-06-28
Repository
Git Hash
Used In: Autopilot Behavior Box
Remixes:
.DXF File:Autopilot hex panel.dxf
.PDF File:Autopilot hex panel.pdf
Manufacturer Link {{{Manufacturer Link}}}
Other Files

A panel for Autopilot Behavior Box, used on the sides and top. The panel has slots on the bottom that fit into Autopilot Bottom Panel and uses a pair of magnets with Autopilot Hex Panel Bracket to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.

Fabrication Notes

This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.

{{#set

 Uses Material=

}}