Difference between revisions of "Autopilot Hex Panel"
From Autopilot Wiki
Line 12: | Line 12: | ||
|.PDF=Autopilot hex panel.pdf | |.PDF=Autopilot hex panel.pdf | ||
}} | }} | ||
− | A panel for [[Assembled In::Autopilot Behavior Box]], used on the sides and top. The panel has slots on the bottom that fit into [[Used With:: | + | A panel for [[Assembled In::Autopilot Behavior Box]], used on the sides and top. The panel has slots on the bottom that fit into [[Used With::Behavior Bottom Panel]] and uses a pair of magnets with [[Used With::Autopilot Hex Panel Bracket]] to snap the top into place. A [[Used With::Autopilot Panel Handle]] is typically used to carry and manipulate the panel. |
==Fabrication Notes== | ==Fabrication Notes== | ||
This is intended to be laser cut out of 3/32"-thick [[Uses Material::Cast Acrylic]]. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use. | This is intended to be laser cut out of 3/32"-thick [[Uses Material::Cast Acrylic]]. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use. |
Revision as of 01:55, 29 June 2021
Autopilot Hex Panel | |
---|---|
Modality | Enclosures |
Schematic Type | 2D CAD |
Description | Behavior Box Panel with hexagonal holes for sound transmission |
Creator | Jonny Saunders |
Version | 2 |
Date | 2021-06-28 |
Repository | |
Git Hash | |
Used In: | Autopilot Behavior Box |
Remixes: |
.DXF | File:Autopilot hex panel.dxf |
---|---|
File:Autopilot hex panel.pdf | |
Manufacturer Link | {{{Manufacturer Link}}} |
Other Files |
A panel for Autopilot Behavior Box, used on the sides and top. The panel has slots on the bottom that fit into Behavior Bottom Panel and uses a pair of magnets with Autopilot Hex Panel Bracket to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.
Fabrication Notes
This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.
... more about "Autopilot Hex Panel"
June 28, 2021 +
Behavior Box Panel with hexagonal holes for sound transmission +
e29e5e0 +
Has subobject"Has subobject" is a predefined property representing a container construct and is provided by Semantic MediaWiki.