Difference between revisions of "Autopilot Hex Panel Tripoke"

From Autopilot Wiki
Jump to: navigation, search
(Created page with "{{Schematic |Image=Autopilot hex panel tripoke.png |Modality=Enclosures, Reinforcement |Schematic Type=2D CAD |Short Description=Panel for mounting an assembled Autopilot Trip...")
 
Line 12: Line 12:
 
|.PDF=Autopilot hex panel tripoke.pdf
 
|.PDF=Autopilot hex panel tripoke.pdf
 
}}
 
}}
 +
 +
A panel for [[Assembled In::Autopilot Behavior Box]], used to mount an [[Assembled In::Autopilot Tripoke]]. The panel has slots on the bottom that fit into [[Used With::Behavior Bottom Panel]] and uses a pair of magnets with [[Used With::Autopilot Hex Panel Bracket]] to snap the top into place. A [[Used With::Autopilot Panel Handle]] is typically used to carry and manipulate the panel.
  
 
==Fabrication Notes==
 
==Fabrication Notes==
 +
 +
This is intended to be laser cut out of 3/32"-thick [[Uses Material::Cast Acrylic]]. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.
 +
 +
{{#subobject:|
 +
|Subobject Of=Cast Acrylic
 +
|Subobject Type=Material
 +
|Material Kind=Plastic
 +
|Material Dimensions=3/32" (thickness)
 +
}}

Revision as of 02:25, 29 June 2021


Autopilot Hex Panel Tripoke
Autopilot hex panel tripoke.png
Modality Enclosures, Reinforcement
Schematic Type 2D CAD
Description Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box
Creator Jonny Saunders
Version 2
Date 2021-06-28
Repository
Git Hash
Used In: Autopilot Behavior Box, Autopilot Tripoke
Remixes:
.DXF File:Autopilot hex panel tripoke.dxf
.PDF File:Autopilot hex panel tripoke.pdf
Manufacturer Link {{{Manufacturer Link}}}
Other Files


A panel for Autopilot Behavior Box, used to mount an Autopilot Tripoke. The panel has slots on the bottom that fit into Behavior Bottom Panel and uses a pair of magnets with Autopilot Hex Panel Bracket to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.

Fabrication Notes

This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.