Difference between revisions of "Autopilot Hex Panel Tripoke"
Line 5: | Line 5: | ||
|Short Description=Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box | |Short Description=Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box | ||
|Creator=Jonny Saunders | |Creator=Jonny Saunders | ||
− | |Version= | + | |Version=3 |
|Submitted Date=2021-06-28 | |Submitted Date=2021-06-28 | ||
}} | }} | ||
Line 24: | Line 24: | ||
|Material Kind=Plastic | |Material Kind=Plastic | ||
|Material Dimensions=3/32" (thickness) | |Material Dimensions=3/32" (thickness) | ||
+ | }} | ||
+ | |||
+ | == Variants == | ||
+ | |||
+ | === Slotted === | ||
+ | |||
+ | This slotted version is intended to go with the slotted version of the [[Used With::Behavior Panel Bottom]], rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful | ||
+ | |||
+ | {{Schematic | ||
+ | |Image=Autopilot hex panel tripoke slotted.png | ||
+ | |Modality=Enclosures, Reinforcement | ||
+ | |Schematic Type=2D CAD | ||
+ | |Short Description=Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box | ||
+ | |Creator=Jonny Saunders | ||
+ | |Version=2 | ||
+ | |Submitted Date=2021-06-28 | ||
+ | }} | ||
+ | {{2D CAD | ||
+ | |.DXF=Autopilot hex panel tripoke slotted.dxf | ||
+ | |.PDF=Autopilot hex panel tripoke slotted.pdf | ||
}} | }} |
Revision as of 23:49, 22 August 2022
Autopilot Hex Panel Tripoke | |
---|---|
Modality | Enclosures, Reinforcement |
Schematic Type | 2D CAD |
Description | Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box |
Creator | Jonny Saunders |
Version | 3 |
Date | 2021-06-28 |
Repository | |
Git Hash | |
Used In: | Autopilot Behavior Box, Autopilot Tripoke |
Remixes: |
.DXF | File:Autopilot hex panel tripoke.dxf |
---|---|
File:Autopilot hex panel tripoke.pdf | |
Manufacturer Link | {{{Manufacturer Link}}} |
Other Files |
A panel for Autopilot Behavior Box, used to mount an Autopilot Tripoke. The panel has slots on the bottom that fit into Behavior Panel Bottom and uses a pair of magnets with Autopilot Hex Panel Bracket to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.
Fabrication Notes
This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.
Variants
Slotted
This slotted version is intended to go with the slotted version of the Behavior Panel Bottom, rather than using pegs, the panels slot directly together. This proved to lead to lots of animal waste leaking through the slots, so we abandoned it, but leave it here for posterity/in case it's useful
Autopilot Hex Panel Tripoke | |
---|---|
Modality | Enclosures, Reinforcement |
Schematic Type | 2D CAD |
Description | Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box |
Creator | Jonny Saunders |
Version | 2 |
Date | 2021-06-28 |
Repository | |
Git Hash | |
Used In: | Autopilot Behavior Box, Autopilot Tripoke |
Remixes: |
.DXF | File:Autopilot hex panel tripoke slotted.dxf |
---|---|
File:Autopilot hex panel tripoke slotted.pdf | |
Manufacturer Link | {{{Manufacturer Link}}} |
Other Files |