Autopilot Hex Panel Tripoke
From Autopilot Wiki
Autopilot Hex Panel Tripoke | |
---|---|
Modality | Enclosures, Reinforcement |
Schematic Type | 2D CAD |
Description | Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box |
Creator | Jonny Saunders |
Version | 2 |
Date | 2021-06-28 |
Repository | |
Git Hash | |
Used In: | Autopilot Behavior Box, Autopilot Tripoke |
Remixes: |
.DXF | File:Autopilot hex panel tripoke.dxf |
---|---|
File:Autopilot hex panel tripoke.pdf | |
Manufacturer Link | {{{Manufacturer Link}}} |
Other Files |
A panel for Autopilot Behavior Box, used to mount an Autopilot Tripoke. The panel has slots on the bottom that fit into Behavior Bottom Panel and uses a pair of magnets with Autopilot Hex Panel Bracket to snap the top into place. A Autopilot Panel Handle is typically used to carry and manipulate the panel.
Fabrication Notes
This is intended to be laser cut out of 3/32"-thick Cast Acrylic. The piece has no trouble with standard laser cutter settings, but the size of the mounting holes (corners) will have to be adjusted depending on which/if magnets you use.
... more about "Autopilot Hex Panel Tripoke"
June 28, 2021 +
Panel for mounting an assembled Autopilot Tripoke in an Autopilot Behavior Box +
e29e5e0 +
Has subobject"Has subobject" is a predefined property representing a container construct and is provided by Semantic MediaWiki.